Dynapro GASKET

DYNAPRO GASKET is a proprietary, two part, advanced thixotropic polymer. DYNAPRO GASKET is designed to seal flange surfaces, threaded fittings, hose clamps, hydraulic and O-ring fittings. Cured product is a tough, resilient material which equals or exceeds the life expectancy of conventional gasketing and sealant materials.

Exclusive, nonstick formula peels off flange surfaces quickly and easily without the need to scrape. Saves costly Iabor time and reduces machine and equipment downtime.

The thinnest gasket is always the best gasket. DYNAPRO GASKET always gives you the thinnest metal to-metal seal. No relaxation. No retorquing bolts needed. Bolt preload always maintained. Where spacer gaskets are required, apply DYNAPRO GASKET to both sides of regular gasket to ensure a perfect seal every time. Labor time for gasket change is reduced. Gasket seal life is dramatically increased.

Use on dirty, oily, rusted flanges. No special cleaning needed. Makes gaskets up to one- quarter (1/4) inch (6.4mm) thick. Easily fills in scratches, gouges, dents, nicks, wire draws and warpage to stop leakage fast.

Packaged in 8 oz pressure can with 4.5 oz aeorsol activator. 12 per case. Item #802200

Copaltite

High temperature liquid sealing compound is used on steam joints up to 2000 psi and 1200° F. It can also be used on flanges without gaskets up to 6500 psi and on threaded joints to 10,000 psi. May be used for connection of metal, ceramic, rubber and most plastics. Suitable where severe vibration and stresses are encountered. It is still possible to separate joints after extended use at high temperature when using Copaltite. Temperature range from -315° F to 1500° F on non-steam applications.

Use on steam turbines, heat exchangers, pressure vessels, boilers, compressors, condensers, pressure gas lines, refrigeration lines and hydraulic systems.

Available in: 5 oz tubes. 6 per case. Item #401116

2.2 lb quart cans. 6 per case. Item #401118

 

Table of Contents

TFE Tape

Teflon® Tape is made of soft, pliable, pure, high density DuPont Teflon, which results in more Teflon® per inch of length. As such, it is the highest quality Teflon® Tape and is easy to handle and apply. Teflon® Tape is a universal thread sealant which can be used on all types of metal or plastic pipe threaded connections. Withstands pressures up to 10,000 psi (703 kg/cm) with temperatures of - 400 F to +500° F (- 240° C to +260° C).

Features and Benefits: Not Flimsy Like Economy Tape. Non-Hardening. Remains Flexible. Lubricates For Easy Assembly. More Teflon per wrap. Meets Mil Spec T-4773.

Applications Include: All threaded connections servicing chemicals, acids, alkalies, caustics, corrosives, fuels, gases, refrigerants and solvents.

Available In: 1/4", 1/2", 3/4", 1" widths. 12 per case.

 

Premium:

1/4" x 1296" Item #402150

1/2" x 1296" Item #402152

3/4" x 1296" Item #402154

1" x 1296" Item #402156

 

TFE Paste

Extreme duty thread sealing compound for use on all metallic and plastic pipe, except ABS Plastic. SEALPRO Teflon® Paste is non-corrosive and is recommended for use on pipe joints, hydraulic and pneumatic fittings. Withstands up to 10,000 Ibs. psi pressure and operates at - 200°F to 600°F. Not suitable for use on oxygen, fluorine, molten metals or alkali.

TYPICAL USES: Acids, air, ammonia, aliphatic solvents, brine, carbon dioxide, castor oils, diesel fuel oil, freons, gasoline, heating oils, helium, hydraulic oils, inert gases (gaseous), jet fuel (JP4 566), kerosene, LPG, manufactured gases, mineral oils, natural oils, nitrogen (gaseous), petroleum solvents, propane, steam lines, sugar (liquid), water (hot or cold)

Packaged in: 8oz brush top can. 24 per case. Item #401102

16oz bush top can. 12 per case. Item #401104

 

TFE Gasket Rope

Teflon® expanded gasket rope is a new form of gasketing material. It is a soft "marsh-mallowy" like cord that compresses to a thin, wide ribbon under pressure. It conforms easily to irregular flange surfaces, making discarding or re-machining of damaged flanges unnecessary. The smallest possible area is exposed to liquids and gases. You can bolt up once and not have to retorque later. A thin strip of adhesive has been applied to the cord to hold it in place on a vertical surface. Since it is highly compressive, only light flange bolt pressure is required to seal. It is useful on plastic, glass and ceramic vessels and pipe flanges part freely and surfaces need no scraping when the gasket is removed. No age deterioration. Resistant to all common chemicals. Non-contaminating. Will withstand pressure to 3000 PSI on both smooth and phonograph - finished steel flanges. Particularly useful for low pressure seals. Temperature limits - 450°F to 600°F, pH range 0-14

Use with seals, heat exchangers, pump or compressor housing flanges, steam-damaged flanges, manways and large diameter flanges, glass joints, concrete lids, fume ducts, fiberglass reinforced plastic vessels, valve stems, bonnet gaskets, hydraulic systems and gear box gaskets.

Available:

1/8"x 100' ........ Item #101730

1/4" x 50'.............Item #101740

3/8" x 25' ......... Item #101745

1/2'' x 15' ..........Item #101750

5/8" x 15' ............Item #101755

3/4" x 15' ............Item #101760

12 per case

Table of Contents

 

TFE Valve Stem Packing

SealPro Teflon® Valve Stem Packing is constructed of 100% PTFE core with a spiral covering of PTFE tape. This pliability allows SealPro Teflon® Valve Stem Packing to conform to worn valve stems and stuffing boxes and yet resist extrusion. When the TFE valve stem packing is wound around a valve stem, pushed into the stuffing box and compressed by tightening the gland nut, it is compacted into a high density packing. Once installed, a slight turn on the gland nut is all the maintenance that is usually required.

Teflon® Valve Stem Packing is unaffected by all common chemicals, will not contaminate product flow, never hardens or adheres, and is completely inert. Eliminates the need for many different kinds of packing. Seals all liquids and gases from -450°F to 550°F.

Use in process lines in food and beverage operations, in chemical plants, refineries, paper mills and power plants.

 

Standard sizes:

3/32" x 50' Item #101700

5/32" x 35' Item #101705

7/32" x 15' Item #101710

9/32" x 9' Item #101715

TFE Valve Stem Packing Kit:

Item #101720 includes:

1 Item #101700

1 Item #101705

1 Item #101710

1 Item #101715

 

Graphite Tape

Graphite tape is made from pure graphite. It has been pre-crinkled to allow ease in packing almost any high temperature valve. Once installed it forms an almost permanent high temperature valve stem packing for use in boiler control and pressure reducing valves.

It can also be used on rotary shafts, rising and rotating valve stems, soot blowers and high temperature flanges. Suitable for pH 1-14, pressure to 3000 psi and a temperature range from -400°F to 5000°F in neutral atmosphere, to 1200° F in saturated steam and to 800° F in an oxidizing atmosphere.

Available in sizes of

1/4" x 25' Item #101780

1/2" x 25' Item #101782

3/4" x 50' Item #101784

1" x 50' Item #101786

Gasket Remover

SEALPRO Gasket Remover quickly dissolves gasket cement and makes removal of any type of gasket easy. Minutes after spraying, the gasket can be removed with a putty knife.

SEALPRO Gasket Remover makes gasket removal quick and easy. Excellent for large gaskets and high temperature gaskets. Removes baked-on gaskets from all types of metal including aluminum. Can be used on vertical surfaces.

Use it also for fast decal removal. For engine combustion chamber carbon deposit removal, use Gasket Remover on valves, pistons and cylinder heads.

SEALPRO Gasket Remover removes all types of large and small gaskets, dried oil, grease, tar, asphalt and paint from wood, glass and any type of metal. Strips all paints, lacquer, shellac and varnish. Removes carbon deposits from valves, pistons and cylinder heads. Removes decals and most synthetic finishes.

Packaged in: 14 oz aerosol cans. 12 per case. Item #401132