4-Way Penetrating Oil

PENETRATES: Frees up nuts and bolts or any part frozen due to rust and corrosion.

DISPLACES MOISTURE: Starts wet engines. Displaces moisture in every part of an ignition system. Eliminates shorting caused by moisture when sprayed on spark plugs, wires, battery terminals and cable coils, inside of distributors, starters, generators and electrical motors.

LUBRICATES: Superior and long lasting lubricant for metal. Reduces wear, stops squeaks and deposits a microfilm on all moving parts. Cleans and degreases as it lubricates and protects.

RUST PROOFS: SEALPRO 4 deposits a protective film which will inhibit corrosion caused by moisture, salt water, acids, caustic cleaners and other chemicals. Harmless to automotive paints, rubbers and plastics. Acts as a moisture shield for pumps and other industrial equipment.

Use SEALPRO 4 For: Automotive, aircraft, shipboard, plant maintenance, truck/trailer fleets, guns, sports equipment, electrical/electronics/relays, locks and latches.

Packaged in 16 oz. aerosol spray cans.......12 per case.......Item #401122

1 Gallon cans.......4 per case........Item #401222.

• High Adhesive Strength • High Dropping Point
• Withstands High Temperatures Without Melting
• Maximum Penetration • Rapid, Grease-Like Setup
• Resists Water Washout • Prevents Rust & Corrosion
• Resists Throw out & Squeeze out from Pressure, Vibration or Impact

  Teflon Gelled Penetrating Lubricant is a transparent, high pressure lubricant with high adhesive strength. A unique combination of natural and synthetic lubricating agents, coupled with the high molecular weight polymer, TFE, (also known as Teflon®) makes this product one of the best available for general lubricating purposes.

  USE ON: Door Hinges, Open Gears, Wire Ropes, Chains and Sprockets, Conveyors, Sliding Metal Assemblies, Manifold Heat Valves, Marine Applications, Heavy Equipment, Turnbuckle and Threads, Winches and Hitches

Packaged in 13 oz. aerosol spray cans. 12 per case. Item #401170

Table of Contents

 

Industrial Silicone Spray

SEALPRO Industrial grade Silicone is a clear lubricant and preservative. The product aids in preservation, waterproofing, prevention of sticking and squeaks, stops rust and reduces wear of moving parts.

USES:

Lubricant for coating conveyors, chutes, guides, fabric layout tables, door hinges, metal locks, windows and glue pots. Release agent for heat sealing applications. Prolongs the life of cutting plates and needles. Lubricates and renews rubber. Lubricates plastic gears, bearings, and slides. Stops squeaks and waterproofs.

SEALPRO Industrial grade Silicone is specially formulated to leave a slippery continuous film that facilitates a wide range of applications. This long lasting coating is invaluable as a lubricant where petroleum oils cannot be used. As with any aerosol product, care should be taken to ensure compatibility with the item being sprayed by testing a remote and inconspicuous area prior to application.

Packaged in 16 oz. aerosol spray cans. 12 per case. Item #401124

Table of Contents

 

 

Friction Guard component is a surface metal conditioner that is added to oil or synthetic lubes. Forms a chemical bond that actually penetrates the pores of metal surfaces to create a remarkably strong film. Metal to metal contact is reduced by the film resulting in less friction, less wear, lower operating temperatures and increased equipment life. It is heat-stable, noncorrosive, soluble in oil and completely safe in all types of rotating and sliding equipment. Reduces the chance of catastrophic failure which is caused by accidental loss of lubrication. Tests have shown it also increases the lubricity of the oil measurably and increases horsepower and torque at all RPM.

Use in engines - gas - diesel - 2 cycle, manual and automatic transmissions, gear boxes, generators, refrigeration units, compressors, drive shafts, pumps, reduction gears, differentials, air tools and all other rotating equipment.

Packaged in:

16 oz. bottles.......12 per case........Item #801110

4 oz. telescoping spout container.....12 per case....Item #801163

Also available in gallons......4 per case........Item #801101

Table of Contents

 

Moly Dry Film Lubricant

SEALPRO Moly is a superior, long-lasting dry lubricant that adheres to all materials. Moly withstands high temperatures and pressures. Moly repels dust and dirt and is resistant to water, alkalies and most acids. Moly greatly increases operating efficiency and reduces maintenance costs. Moly prevents corrosion, seizing, wear, galling, binding, sticking, chattering, squeaking and scraping.

 

SEALPRO Moly Dry Film Lubricant is designed for high pressure, load-bearing applications. Excellent for anti-friction and anti-seize where a dust and dirt resistant dry lubricant is desirable.

 

USES: May be applied wherever petroleum or synthetic lubricants are not suitable (except oxygen systems). Use on gears, bellcranks, slides, chutes, bearing surfaces, press fits, chains, conveyors, cylinder packings, shafts, valve stems, vulcanized rubber molds. High load carrying qualities assure lubrication under extreme pressures. Lubricates construction and other heavy equipment. Eliminates chattering and scraping. Resists to water and dirt.

 

Packaged in 15.75 oz. aerosol spray cans. 12 per case. Item #401134

Table of Contents

 

TFE Dry Film Lubricant

SEALPRO TFE Dry Film Lubricant provides a tough hard industrial coating that reduces friction and is air cured. Dries to a tough, deep gray finish that is highly cohesive. It is safe for use on ceramics, glass, metal, wood, plastics and elastomers. Highly effective as a mold release.

SEALPRO TFE Dry Film Lubricant is a superior, long lasting dry lubricant containing Telemer Dispersion for instant lubrication on any clean, dry surface. Attracts less dust, less dirt than silicone or petroleum lubricants. It repels water and oils.

TECHNICAL DATA:

Self-curing (no heat required) • Effective between - 300°F to 550°F

Acid, alkali, moisture resistant • Greaseless • Chemically inert

USES: Industry: Tool faces, cutting blades, conveyors and chutes, cold molds, pipe threads, paper and food packaging machines and looms.

Farms: Chutes, conveyors, bins and tank interiors, fertilizer spreaders (prevents corrosion), plows, and saws.

Marine: Sliding windows, channels, propeller shafts, metal hulls, masts and pulleys.

 

Packaged in 14 oz. aerosol spray cans. 12 per case. Item #401136

Table of Contents

 

Red Grease

 SEALPRO Red Grease is a superior quality multi-purpose grease that will maintain a constant viscosity over a wide range of temperatures (0°F to 350°F) and is 100% waterproof. The reversibility (ability to return to original consistency after exposure to heat) allows this aluminum grease to not break down, harden, separate, or emulsify when subjected to excesses of heat and pressure.

Molecular structure of this aluminum complex grease is designed to resist oxidation during periods of no load. It prevents corrosion and is not affected by acids, alkalies or salt. Has outstanding lubricity.

USES:

Industrial bearings, pillow blocks, U joints, motor shafts, truck and tractor fifth wheels, hinges, agricultural hitches, heavy equipment bearing surfaces, cables, striker plates, gears, linkage, pulleys, etc.

Packaged in 12 3/4 oz. aerosol spray cans. 12 per case. Item #401146

Table of Contents

 

Premium Grease

DynaPro Premium Grease is a long life, high temperature grease. Made from the finest raw materials available, this formulation represents the state of the art in soap thickened mineral oils. Possesses outstanding thermal stability and unique oxidation inhibitors. Effective at high temperatures where regular lubricants fail. Protects bearings against galling or seizing due to heavy loads at high temperatures, and protects bearings against corrosion. Formulated to meet or exceed ASTM/NLGI bearing spec., class GC. N.L.G.I. #2. Temperature range is 15°F to 425°F. Melting is point 525°F. Resists break down under the toughest conditions. Contains antirust, extreme pressure, anti-wear and oxidation inhibitor additives.

Use in heavy industrial equipment operating under adverse conditions like high and low temperatures, heavy continuous duty and shock loads. Can also be used as a general purpose and automotive grease on disc and drum brake wheel bearings, electric motor bearings, sealed for life motor bearings, kiln car bearings as well as all chassis components.

Packaged in 14 oz. cartridges. 10 per case. Item #801260 

Table of Contents

 

 

Chain & Cable Lubricant

 SEALPRO Chain & Cable Lubricant is a special formula with MOS2 and a superior lubricant designed for all types of chains, cables, linkages, sprockets, hinges and roller assemblies. Penetrates and protects bearings, pins and bushings from rust and excessive wear. Maintains lubrication and adheres under high RPM. Withstands high temperatures and pressures.

USES: Industry: Chain drives, cable drives, cutter bars, link & roller assemblies, hoist chains, conveyor power linkages.

Automotive: Linkages, cables, trailer connectors, hood springs, clutch & brake cables, cycle chains.

Marine: Trailer winches, hoists, throttle and transmission cables, I/0 power drive linkages and anchors. Will not gum. Stops rust and corrosion immediately. Extends cable and chain life.

TECHNICAL SPECIFICATIONS: Contains Molybdenum Disulfide (MOS) • Withstands up to 400,000 psi • Resists throw-off • Contains no harmful acids or detergents. Provides maximum cohesion under high RPM and pressure.

METHOD OF APPLICATION: Spray liberally onto chain or wire rope. Oils will naturally carry SEALPRO Chain & Cable Lubricant into the pins and bushings &emdash; Moly will keep it there.

Packaged in 18 oz. aerosol can. 12 per case. Item #401138 

Table of Contents

 

Spray Cutting Oil

 SEALPRO Cutting Oil offers increased tool life with the additional advantage of applying the product directly when it is needed.

SEALPRO Spray Cutting Oil is specially formulated to increase tool life when applied to metals and alloys. Excellent for all pipe threading applications for better threads in shorter time, without distortion. Suitable for hard stainless steels, aluminum, brass and copper.

TECHNICAL SPECIFICATIONS:

•Appearance- brown liquid

• Viscosity at 100°F- 190 SUS

•Sulphur content % by weight- 0.54

• Chlorine content % by weight- 0.66

•Fat content % by weight- 2.7

• API Gravity at 60°- 25.9

•Weight per gal.- 7.49

USES: Drilling, tapping, reaming, thread cutting, milling, grinding, boring, sawing and turning.

For large jobs choose SEALPRO Cutting Oils, available in bulk, as light or dark thread cutting oil.

Packaged in 12 oz. aerosol spray cans. 12 per case. Item #401144

 

Table of Contents

Open Gear & Wire Rope Lubricant

SEALPRO Open Gear and Wire Rope Lube is a high performance lubricant that penetrates the pores of metal surfaces, adds life to wire rope and prevents break downs. Long lasting lube for gears and sprockets. Spray can does not require heating and insures complete coverage. Will not become brittle or break down. Will withstand high pressure, severe temperature extremes and does not wash or weather away.

The creeping action makes this product a superb moisture displacer and gives outstanding rust prevention. Can be applied while equipment is in operation.

USES: Gear boxes, open gears, exposed gears, wire ropes, cables and pulleys. Not recommended for anti-friction bearings.

 

Packaged in 18 oz. aerosol spray cans. 12 per case. Item #401148 

Table of Contents

 

Tool Coolant

 SEALPRO Tool Coolant is a special formulation of chemicals designed to reduce tool temperatures while actively reducing friction by lubrication.

Galling is prevented and cutting chips are dispersed without messy residue.

SEALPRO Tool Coolant will result in longer tool and tap life and is equally effective on all machine and hand tool operations.

SEALPRO Tool Coolant does not contain sulphur or carbon tetrachloride.

USES:

Industry: Machining operations using drill bits, taps, reamers and dies.

Farm: All cutting, sawing, drilling operations for increased tool life and cutting efficiency.

Spray tool and work surface liberally to reduce surface tension and disperse chips quickly and easily from work surface. Do not use on aluminum.

Packaged in 20 oz. aerosol spray cans. 12 per case. Item #401150

Table of Contents

 

 

Spry Belt Dressing

 

SEALPRO can provide various types, densities and compositions of belt dressing each specifically designed for the type of belting used (rubber, leather, cotton, etc.) and operating conditions (high temperature, dusty, clean, low temperature). A wide selection of package sizes and types is available for treating the largest flat belts to the smallest

SEALPRO Belt Dressings contain no resins' silicones, sticky oils, varnishes, or other harmful substances. They maintain their characteristics in all types of climate and power transmission conditions. They will waterproof and preserve all types of belts and will not glaze or cause harmful build-ups.

WARNING: OO NOT APPLY TO A MOVING BELT OR YOU MAY SUFFER BODILY INJURY BY BEING CAUGHT IN MOVING MACHINERY.

Table of Contents