Sealtite Gaskets

SEALTITE-Die cut Handhole and Manhole gaskets available in both Obround and Elliptical. Cut from 1/4" thick 70D EPDM material. Temperature to 350°F and pressure to 200 PSI.

TOPOG-E^® Gaskets

TOPOG-E® molded rubber gasket for boilers, water heaters and air tanks that use pressures to 180 PSI and temperatures to 380°F. TOPOG-E® gaskets can be easily replaced without any chiseling or buffing of the surface. Available in Handhole and Manhole obround and elliptical sizes. Not available in sheet form.

Blue Max Gaskets

BLUE MAX-Manufactured from proprietary tacky cloth of glass, synthetic fibers and brass wire, impregnated with blue elastomer compound. The material is cut and formed to the desired shape, then coated with a proprietary Teflon® material per MIL SPEC T-27730A. The finished gasket is easily installed and removed. Test by major boiler manufacturers confirm that Blue-Max gaskets seal with zero leakage on steam to 450 PSI and on cold water hydro tests to 1500 PSI. BLUE-MAX withstands working temperatures up to 500°F. Available in Handhole and Manhole, Obround and Elliptical.

Spiral Wound Gaskets

Spiral Wound gaskest are often used for the manhole / handhole application.

Spiral wound gaskets are manufactured by wrapping alternating layers of thin metal, such as 304 Stainless Steel and a soft gasket filler material such as non-asbestos material, ceramic, graphite, or Teflon®. The chevron-shaped profile of the gasket provides resilience and a "spring like" characteristic that enhances the performance of the gasket. The shapes available are round, oval, obround, diamond, square and rectangle. Standard pressure is 0-999 PSI. Available to fit all standard boiler and pipe flange sizes.